STICK ARRAY SYSTEM
-
MODEL - VA42.12
3.5" Passive Speaker System - 2000W System Program
- 12" Active Subwoofer
This product cannot be purchased on this site, please click on the button below to request a free quote!
| MODELO | VA42.12 |
|---|---|
|
System Type |
3.5" Passive Speaker System
|
|
Output Power |
120W Continuous, 240W Program, 480W Peak
|
|
Sensitivity (1W/1M) |
95dB
|
|
Maximum SPL @ 1m |
122dB Max. (calculated)
|
|
Frequency Response (-6dB) |
160Hz-20kHz
|
|
Impedance |
8 ohms
|
|
Transducer Low |
4 x 3.5'' Woofer, 1'' (25.4mm) Voice Coil
|
|
Crossover Frequency |
500Hz
|
|
Dispersion (-6dB) |
100° Horizontal
|
|
Attachment Points |
Adjustable Rigging System, Horizontal Splay Rotation in -90°-0°- 90° Increments from 180°
|
|
MAINS CONNECTOR |
Neutrik PowerCON Connector In & Link
|
|
Electronic Protections |
Thermal / Convection-Fan / Overload / Digital Limiter / Compressor |
|
Mounting |
2 x Holder, 1 x Input Connector for VA-WP Pole, Another with Input Connector for VA42TP
|
|
Dimensions (HxWxD) |
448 x 106.6 x 98mm (17.64'' x 4.20'' x 3.86'')
|
|
Net Weight |
3.48Kg (7.67 Ibs)
|
|
Passive Speaker |
VA42TP
|
|
System Type |
3.5" Passive Speaker System
|
|
Output Power |
120W Continuous, 240W Program, 480W Peak
|
|
Sensitivity (1W/1M) |
95dB
|
|
Maximum SPL @ 1m |
122dB Max.(calculated)
|
|
Frequency Response (-6dB) |
160Hz-20kHz
|
|
Impedance |
8 ohms
|
|
Transducer Low |
4 x 3.5'' Woofer , 1'' (25.4mm) Voice Coil
|
|
Crossover Frequency |
500Hz
|
|
Dispersion (-6dB) |
100° Horizontal
|
|
Attachment Points |
Adjustable Rigging System, Horizontal Splay Rotation in -90°-0°- 90° Increments from 180°
|
|
Enclosure Construction |
Plywood Cabinet, Resistant Paint, Metal Grille with Foam
|
|
Mounting |
1 x Holder, 1 x Input Connector for VA-42BM or VA-WP Pole
|
|
Dimensions (HxWxD) |
422 x 106.6 x 98mm (16.61'' x 4.20'' x 3.86'')
|
|
Net Weight |
3.41Kg (7.52 Ibs)
|
|
Active Subwoofer |
VA12SA
|
|
System Type |
12" Active Subwwofer Apeaker Cabinet
|
|
Frequency response -6 dB |
40Hz-500Hz
|
|
Total amplifier power |
1000W Continuous/2000W Program/4000W Peak Class D @ 4 Ohms
|
|
Amplifier, subwoofer |
500W Continuous / 1000W Program / 2000W Peak Class-D @ 4ohms
|
|
Amplifier, satellite / mid / high unit |
500W Continuous / 1000W Program / 2000W Peak Class-D @ 4ohms
|
|
Sensitivity (1W@1m) |
96dB
|
|
Maximum SPL@1m |
130dB (Calculated)
|
|
Electronic Protections |
Over heat Protection / Short Circuit Protection / Digital Compressor
|
|
Cooling |
Temperature-controlled fan
|
|
Connections |
Input: 2 Combo-XLR & 1/4", RCA In L & R, 1 XLR Thru & Mix out
|
|
External Controls |
Volume Control / Switch for Input sens. / Swtich for mode selector / Power ON with Green LED / Limiter with Red LED / Ground Lift / IP Control
|
|
Power Supply |
110V/230V -50/60Hz
|
|
Enclosure Construction |
Plywood cabinet, resistant black paint, metal grille with foam, rubber feet, handles
|
|
Mounting |
Holder with Input Jacks for Pole
|
|
Dimensions (W x H x D) |
430 x 450 x 480 mm (16.93" x 17.72" x 18.90")
|
|
Net Weight |
20.51 kg / 45.22 lbs.
|
|
Pole |
VA-WP
|
|
Enclosure Construction |
Plywood Cabinet, Resistant Paint, Metal Grille with Foam
|
|
Mounting |
2 x Holder, 1 x Input Connector for Sub, Another with Input Connector for Satellite
|
|
Dimensions (WxHxD) |
700 x 106.6 x 98mm (27.56'' x 4.20'' x 3.86'')
|
|
Net Weight |
2.70Kg (5.95 Ibs)
|
This product cannot be purchased on this site, please click on the button below to request a free quote!